12mm Bolt For Toyota Tundra Skid Plate

12mm bolts and 3 phillips screws and installed the Chrome bumper undercover.

12mm bolt for toyota tundra skid plate. No non-JIS standard metric bolts use a 12mm socket M6 uses 10mm M8 uses 13mm Found this thread which confirms. Ad 75 of the top 100 retailers can be found on eBay. As far as length not all of the length is threaded for attachment some is used for the pilot tip.

If no one chimes in with the exact bolt for you 10mm head has a 6mm x 10 thread 12mm head is 8mm x125 thread 14mm head 10mm x 125 thread. ColorConnex Coupler Plug Kit 3 Piece Automotive Type C 14 in. The larger undercover still.

Ad 75 of the top 100 retailers can be found on eBay. Do not fully tighten the bolts at this time but make sure the skid plate is supported. The 12mm means it is the Toyota Bolt that uses the 12mm wrench to bolt it in.

Do you have the trd skid plate as well. Front Skid Plate Bolts 12mm Top. Transmission Drain Plug Gasket Engine Oil Crush Washer Seal Rings Replacement for 4Runner Sequoia Tacoma Tundra Lexus GS450H IS F IS250350 LS430 LS460 Replaces 35178-30010 M12 Pack of 10pcs.

Our products tend to be designed to get you there with everything you may need. Dont tighten to full torque. Discussion Starter 1 Sep 19 2004.

The kit sell for 375 at the dealership but trdsparks sell it for 309. It is for the Skid plate on many vehicles but can be used in other areas on Toyota Trucks and Cars. C Pushhold the skid plate in position and start threading and hand tighten the bolts using the correct socket in the following order Fig.