2000 Toyota Tundra Lower Ball Joint Bolts
New Twist on Lower Ball Joint failure Bolts sheared off of LBJ So when I ordered my ball joints from Toyota I also ordered new bolts but there are no clear markings on the head stating what grade the bolts are.
2000 toyota tundra lower ball joint bolts. OEM ball joints are manufactured to meet Toyotas standards for performance. This video is only for 1st gen Tacoma 1st gen Tundra and 3rd gen 4Runner only. Remove nut bolts and compression lower arm assembly.
97 ft lbs Steel wheel. 123 ft lbs Aluminum wheel. 1 Straighten wheels 2 Loosen lug nuts jack and remove wheel 3 loosen 4 ball joint nuts 4 remove cotter pin and remove ball joint large nut 5 Remove cotter pin and remove tie rod nut 6 Using ball joint tool separate ball joint from control arm 7 Remove 4 nuts.
Remove cotter pin from tie rod bolt and remove nut. Front Driver Side Replaces. Upper control arm ball joint.
221 ft lbs Lower ball joint. 81 ft lbs Sway bar bolt. Earlier Friday Afternoon We Replaced The Front Passenger Lower Ball Joint On A 2000 Toyota Tundra SR5 V8.
154 ft lbs Control sensor wire A. Install the inner joint so that the circlip is felt to seat in the retaining groove. NOTE Use new circlips split pins and self-locking nuts for assembly.
I used a pitman arm puller to remove the tie rod from the ball joint. TOYOTA 2006 TUNDRA 47L V8 Suspension Ball Joint. 21 ft lbs on spindle.