2000 Toyota Tundra Keyless Entry Remote Programming

With the key OUT of the Ignition OPEN and UNLOCK the Drivers door.

2000 toyota tundra keyless entry remote programming. 08191-00871 RS3300 Used Rated 500 out of 5 Dealership. I have a 2000 toyota tundra and bought a keyless remote. The process of programming a new Toyota keyless entry remote involves three phases.

Insert the key into ignition switch and turn it to ON. The drivers door open and unlocke. Here are the Toyota remote programming instructions.

Many people dont know that they can purchase their own replacement vehicle entry remote save up to 70 off of marked up Dealership prices and program the replacement remote to their vehicle themselves. Ive read the programming can only be done at a Toyota dealership but it is 50 to do the 2 minute process. It requires the installation of a new lock kit and the programming of keyless entry remotes to operate with that specific lock system.

Press and hold the ECUs PROGRAMMING SWITCH for 3 seconds. Perform the following steps within 5 seconds. It has a little green button on the side which is the reset button.

Toyota Car and Truck Forums It has been a long time since I did this. Steps 2 and 3 should be performed within 40 seconds. 2000 tundra keyless remote.

Indicating successful entry into programming mode. Close and open drivers door TWICE. Jump to Latest Follow 1 - 14 of 14 Posts.