17 Toyota Tundra Oil Reset

Press and hold trip meter reset knob and turn the ignition to the RUN position.

17 toyota tundra oil reset. That it is the full procedure how to reset odometer and two trip meters Toyota Tundra 2 generation. Turn the ignition off and then start the engine to verify the indicator has been reset. STEP 1 Turn The Ignition ON.

Dont Start The Engine. For a keyless push Start with your foot off the brake pedal. Hold trip meter RESET button down at least 5 seconds.

The instructions below tell you how to reset your oil change light aka maintenance light on your 2007 or newer Toyota Tundra. Or reset check engine light airbag light inspection key or insp errors when maint reqd for Toyota cars. Press and hold trip meter reset knob and turn the ignition to the RUN position.

STEP 3 Then Turn The IGNITION To OFF. Turn the ignition key to the ACC or LOCK position with the odometer reading shown. Hold knob for at least 5 seconds until 000000 is displayed and light turns off.

Turn the ignition key to the OFF position. Make sure that the trip or odometer is on the regular odometer ODO There we go now turn the ignition off Hold down the odometer button and turn the truck to the on position Keep hold the button then youll see the four flashing dashes and the maintenance required light will go away 2007-2017 Toyota Tundra Time needed. Locate the Trip Meter Reset Button.

Continue to hold the reset button until the odometer displays 000000 and then the original value is displayed. 2012 Toyota Tundra maintenance required oil reset light. Turn ignition key to ON position while holding down trip meter.